Warne 200M is a pair of Maxima fixed rings for a 1-inch scope tube, low height, matte black steel. The rings are vertically split and permanently clamp to Weaver-style cross-slot bases, Warne Maxima bases, and mil-spec Picatinny rails.

Each ring uses Warne's square stainless recoil-control key so the ring bears on the full face of the slot instead of a round pin. Four T-15 Torx cap screws per ring clamp the tube; Warne recommends 25 in-lb. The low ring height is listed to clear objectives up to 36 mm depending on barrel contour. Pair weight is 4.3 oz. Dimension B (rail to inside of ring) is 0.250 in.

These are fixed rings, not the Maxima QD lever set. Confirm objective bell clearance on the rifle before choosing low height.

• Manufacturer: Warne — Maxima 200M, UPC 656813000227
• Tube / height / finish: 1 in; low; matte steel
• Fit: Weaver, Picatinny, Warne Maxima bases
• Hardware: square recoil key; 4x T-15 per ring; 25 in-lb
• Objective / weight: up to 36 mm; 4.3 oz pair