Polite Society Huckleberry Multi-Caliber Suppressor, Titanium, .22/.30/.36 Cal Endcaps

Ready for anything, quietly. One silencer for many hosts and calibers — match the endcap to the task, without buying another silencer.

The Polite Society Huckleberry answers the most expensive problem in suppressor ownership: every additional can means another $200 stamp and another wait. Instead of buying three suppressors, you buy one and change its endcap.

Three interchangeable endcaps — .22, .30, and .36 cal / 9mm — swap out with a standard ¾″ wrench, letting you size the bore aperture to whatever you're shooting. That covers a range from rimfire all the way to .300 Win Mag, plus 9mm pistol duty. A .22 trainer in the morning, a 9mm carbine in the afternoon, a magnum rifle in the fall, one tax stamp for all of it. Sizing the bore to the caliber also matters acoustically: a properly matched aperture does more for sound reduction than an oversized hole ever will.

The Huckleberry is built on the same core architecture as the rest of the line. Tripass Core Technology™ feeds three gas paths — a central bore and two helical bypass channels — into three expansion and mixing chambers where counter-clockwise blades disrupt and cool the gas, reducing signature without inducing backpressure. Acoustic Golfball Dimpling™ lines the interior, adding volume and deepening tone to the tune of roughly 1.5 inches of length you don't have to carry. All of it printed monolithically in Grade-5 titanium at 8.60 ounces.

Mounting

HUB-compatible, and — because it's meant to move between hosts — it ships with both 1/2×28 and 5/8×24 HUB Mounted Brake™ direct-thread mounts. Each is machined from 17-4 stainless with an integrated flash hider and a hex drive.

Key Features

• Interchangeable .22, .30 and .36 cal / 9mm endcaps — swap with a standard ¾″ wrench
• Rimfire through .300 Win Mag, plus 9mm, on a single tax stamp
• 8.60 oz. Grade-5 titanium, monolithic LPBF additive construction
• Tripass Core Technology™ — signature reduction without induced backpressure
• Acoustic Golfball Dimpling™ for added internal volume and a deeper tone
• HUB compatible; both 1/2×28 and 5/8×24 HMB mounts with flash hiders included
• Type-2 anodized finish · Made in USA (Tampa, FL)
• Backed by The Guarantee: fix or replace

Specifications

Length and weight measured with the HMB direct-thread mount installed. NFA item — requires ATF Form 4 transfer and a $200 tax stamp. Osage County Guns handles the transfer paperwork with you from filing through approval.