A .30-caliber suppressor that weighs 9.1 ounces and measures 6.8 inches is not supposed to also be full-auto rated with no barrel length restrictions. The XH-762 gets there with a hybrid material strategy: a titanium body for weight, with a 718 Inconel blast baffle where the heat and erosion actually happen. Add B&T's reduced backpressure core and it becomes one of the most rifle-friendly .30 cans on the market. B&T part number SD-145963, UPC 840225722895.

The Hybrid Argument

Building an entire suppressor from Inconel gets you unlimited durability and unacceptable weight. Building it entirely from titanium gets you a light can that erodes at the blast baffle. B&T's XH line puts each material where it belongs: Inconel at the blast baffle, where the first and most violent gas impingement occurs, and titanium everywhere else. The result on a .30-caliber can is 9.1 ounces with no compromise on the full-auto rating.

Reduced Backpressure — Under 2%

B&T's RBS core is engineered to keep the suppressor from over-driving your rifle's action. B&T's published figure is a negligible bolt speed increase of +/- 1.9% on M4 carbines. Less backpressure means less gas in your face, less accelerated wear on the bolt and buffer, and a rifle that doesn't need re-tuning or an adjustable gas block just because a suppressor went on the end.

SOCOM Burn-Down Tested

B&T publishes the test protocol: SOCOM burn-down testing consisting of 240 rounds x 95 repeated cycles, equating to more than 22,000 rounds fired during the final testing phase. That is a meaningful, specific durability claim rather than a marketing adjective.

Weldless Printed Construction

The XH-762 is produced by additive manufacturing as a weldless structure — no welded baffle stack, no weld seams to crack under the thermal cycling that destroys conventional cans on heavy schedules. Finish is Type 2 anodized black with a low-flash design.

Mounting

The XH-762 ships with a B&T Taper HUB and a RAID muzzle device, and is HUB interface compatible — the industry-standard 1.375x24 TPI thread — so it works with mounts from across the market rather than locking you into one system.

B&T XH-762 Specifications

Who This Suppressor Is For

The .30-caliber can is the most versatile suppressor most shooters will own, and the XH-762 is the version that doesn't punish you for putting it on a lightweight rifle. Precision .308, 300 BLK carbines, and semi-auto .30 platforms that get run hard. If you have been avoiding a .30 can because of muzzle weight, this is the one that solves it.

B&T Suppressor Warranty

B&T states: "If your suppressor becomes non-functional or damaged during non-negligent use, we will be replacing your suppressor free of charge." Discontinued models are eligible for an upgrade to the appropriate generation equivalent. Use of a 0-twist rifled barrel voids the warranty, as do handloads, incorrect-caliber ammunition, bore obstructions, and unauthorized repair attempts.